×
RadLog
I just joined and my station does not show up
2 years 1 month ago #6217
by Santeros1
I just joined and my station does not show up was created by Santeros1
Hello, I just joined (Santeros1) a few hours ago and my station does not show up on the list or the map.
My DIYGeiger counter RadMonPlus display says that it is sending ok, and I've double-checked my profile settings.
Wondering if there is something additional I need to do.
My DIYGeiger counter RadMonPlus display says that it is sending ok, and I've double-checked my profile settings.
Wondering if there is something additional I need to do.
Please Log in or Create an account to join the conversation.
- Tocsin_bang
- Offline
- Senior Member
2 years 1 month ago #6219
by Tocsin_bang
Replied by Tocsin_bang on topic I just joined and my station does not show up
It can take a while for stations to show as Dan has to set things up manually, I believe. At one time I believe it was automatic, but this caused potential security issues I believe
Please Log in or Create an account to join the conversation.
2 years 1 month ago #6220
by rboeije
Replied by rboeije on topic I just joined and my station does not show up
Related to this question, I tried to test upload by a manual
/radmon.php?function=submit&user=xxxx&password=yyyyyy&value=16&unit=CPM
and I get a message fatal, no datetime.
I use part of the software of WhyzaGC, and it looks like there is no datetime part in the generated url.
If add &datetime=2022-09-18%2019:00:00, I still get the same.
In my ESP I get 400 as a returncode. But that can be both for the above mentioned reason (It takes time before station is created) or because the datetime is missing.
Anyone that can post an example url including a dateime part (user/pwd fake:))
/radmon.php?function=submit&user=xxxx&password=yyyyyy&value=16&unit=CPM
and I get a message fatal, no datetime.
I use part of the software of WhyzaGC, and it looks like there is no datetime part in the generated url.
If add &datetime=2022-09-18%2019:00:00, I still get the same.
In my ESP I get 400 as a returncode. But that can be both for the above mentioned reason (It takes time before station is created) or because the datetime is missing.
Anyone that can post an example url including a dateime part (user/pwd fake:))
Please Log in or Create an account to join the conversation.
2 years 1 month ago #6221
by nu3e
No datetime is needed. I use this format string to upload my station counts:
"http://radmon.org/radmon.php?function=submit&user=%s&password=%s&value=%d&unit=CPM"
Be patient and wait for Dan to respond.
Replied by nu3e on topic I just joined and my station does not show up
Anyone that can post an example url including a dateime part (user/pwd fake:))
No datetime is needed. I use this format string to upload my station counts:
"http://radmon.org/radmon.php?function=submit&user=%s&password=%s&value=%d&unit=CPM"
Be patient and wait for Dan to respond.
Please Log in or Create an account to join the conversation.
2 years 1 month ago #6222
by rboeije
Replied by rboeije on topic I just joined and my station does not show up
Thanks. I am patient, no worries.
But if I submit your string and fill in the right values, I get
Fatal error in RadMon : No datetime specified
If I send it from the ESP I get error 400 back.
So that made me wondering.
But if I submit your string and fill in the right values, I get
Fatal error in RadMon : No datetime specified
If I send it from the ESP I get error 400 back.
So that made me wondering.
Please Log in or Create an account to join the conversation.
2 years 1 month ago #6223
by mw0uzo
Replied by mw0uzo on topic I just joined and my station does not show up
Hi there! Sorry for the wait, house maintenance jobs in the way!
There was definitely a problem, the special character in your password was filtered out.
Try sending data again without the special character and it should work. I was able to send a test reading of 20CPM to your user account.
There was definitely a problem, the special character in your password was filtered out.
Try sending data again without the special character and it should work. I was able to send a test reading of 20CPM to your user account.
Please Log in or Create an account to join the conversation.
Moderators: Gamma-Man
Time to create page: 0.163 seconds